very powerful in full working order!
4/3/2 Channel Power Amplifier
Features
General-Amplifiers
Darlington Bi-Polar Outputs
Auto Overcurrent Protection
Bass Engine Ready
4/3/2 Channel Operation
Adjustable Crossover (HP/LP)
Input Mode Selector Switch
One side Terminal Layout
Gold Plated RCA Input Connectors
Speaker Level Inputs
Noise Elimination Coil
MOSFET Power Supply
DC-DC PWM Power Supply
Discrete Pre-Amp Stage
DC Straight Design
STAR Circuitry
Solid Copper Bus Bars
MultiMode
Top Mounted LED Power Indicator
Gold Plated Insert Power Terminals
Specifications
MAX Power (at 14.4V, EIAJ)
Per channel into 4 ohms- 90W x 4
Bridged 4 ohms- 240W x 2
Per channel into 2 ohms-
RMS Power (at 12V, 20Hz-20kHz)
Per channel into 4 ohms- 30W x 4 (0.08% THD)
Per channel into 2 ohms- 40W x 4 (0.3% THD)
Bridged 4 ohms- 80W x 2 (0.3% THD)
RMS Power (at 14.4V, 20Hz-20kHz)
Per channel into 4 ohms- 50W x 4 (0.08% THD)
Per channel into 2 ohms- 60W x 4 (0.3% THD)
Bridged 4 ohms- 120W x 2 (0.3% THD)
General-Amplifiers
Heat Sink (WxHxD)in- 10-5/8O x 10-1/4O x 2-3/8O
Foot Print (WxHxD)in- 10-5/8O x 11O x 2-3/8O
Slew Factor- greater than 5
Input Impedance- 10k ohm
Speaker Impedance- 4 or 2 ohms(stereo), 4 ohms(bridged)
Dividing Network- 50Hz-200Hz HP/LP (12dB/oct)
Power Requirements- 14.4V DC (11V to 16V)
Heat Sink (WxHxD)mm- 270mm x 260mm x 60mm
Foot Print (WxHxD)mm- 270mm x 280mm x 60mm
Weight- 4.2kg(9lbs. 4oz.)
Frequency Reponse- 10Hz - 50kHz (+0, - 1dB)
Signal to Noise (S/N)- 100dBA (referenced to rated power)
Input Sensitivity (for rated power)- 200mV ~ 4.0V